Customized Multi-functional SMPTE Hybrid Video/ Audio/ Ethernet Transmission Equipment Over Optical Fiber

1. Comply with DVB-ASI, SMPTE424M, SMPTE292M, and SMPTE259M (C) standards

2. Use full digital processing technology, clear image, no color phase difference

3. With APC circuit, constant output optical power, large dynamic range

4. CWDM technology to achieve multi-channel signal transmission, large capacity, easy to upgrade

5. The input has a cable balance to compensate for the loss of cable transmission

6. With the output clock recovery reduction signal jitter circuit, it can handle the distortion signal very well

7. Industrial grade design, modular design makes the equipment reliable and flexible

8. Single multi-mode compatibility, no relay distance of up to 200M

9. Support for pathological signal (optional):

PLL signal to detect the locked state of the SDI phase-locked loop. Ensure that the phase-lock ring of the optical terminal can work normally without locking in any scene.

Equalizer signal, it will truly reflect the design state of the equalizer. Effectively balance and process the coaxial cable signals of different distances within a certain range to ensure the integrity of the signals

SDI Matrix signal, synthesize the above two signals. No matter day or night, the images generated by any scene can ensure the effective transmission

10. Plug and play, no setup required

11. Devices are used in pair. note that devices are distinguished between transmitter and receive

Pictures

Application

1. SMPTE compatible with serial digital interface

2. UHDTV/4K/8K/HDTV/SDTV video

3. IP media gateway

4. Digital video processing and editing

Connection Diagram Reference

Reminder

1. It is recommended to use the short optical fiber link for the first time to ensure that all the functions of the equipment are normal, and then do long-distance transmission

2. The signal of the fiber optic converter can be output to the power amplifier, but the audio source of the power amplifier can not be output the audio source signal to the fiber optic converter, otherwise the equipment will be burned

Troubleshooting of the indicator

1: Power indicator is abnormal (POWER)

Answer: Check whether the power adapter meets the equipment requirements or the power adapter fails

Whether the socket is not tight or loose

2: Fiber indicator is abnormal (FIBER)

Answer: Check whether the optical fiber interface is loose and not plugged in

Check whether the optical fiber is too attenuated

3: Video indicator is abnormal (VIDEO)

Answer: Check the signal source

Replace the video cable

4: Data indicator is abnormal (DATA)

Answer: Check the COM port, whether the baud rate is consistent

Check whether the serial port cable is connected backward

Attention

Lightning protection, static electricity, and grounding:

It is recommended that when installing the device, consideration should be given to the impact of grounding by lightning and prevention measures. Strong static electricity will damage the optical device and data chip in the equipment. It is recommended that when plugging/unplugging the data port of the optical converter, please disconnect the power supply of the optical converter first.

Fiber and optical components:

Be careful when plugging the optical fiber, as the optical components of the optical converter are very fragile, and you should avoid causing damage to the optical components. It should be noted that the light source produced by the optical components of the optical converter will be harmful to the eyes, so do not have direct eye contact with the optical components ofthe optical converter. If you need to detect the optical power of the optical converter, please use the optical power meter.

Equipment and installation procedures:

1. Optical fiber installation: Please carefully insert the optical fiber into the optical fiber interface of the optical terminal after confirming that the optical fiber link meets the installation requirements.

2. Equipment installation: The equipment can be distinguished between transmitter and receiver, and it is stated clearly on the label and printed on the chassis of the equipment.

Packaging & Shipping

Payment

Welcome to inquire!